Exemples d'utilisation de "прочность на растяжение" en russe

<>
прочность на растяжение = 580 МПа (отклонение ± 20 %) tensile strength = 580 MPa (± 20 % variation)
прочность на растяжение- не менее 20 МПа; tensile strength not less than 20 MPa.
прочность на растяжение = 420 МПа (отклонение ± 20 %) tensile strength = 420 MPa (± 20 % variation)
Rmt = действительная прочность на растяжение, в Н/мм2; Rmt = actual tensile strength, in N/mm2;
прочность на растяжение (Rm): напряжение, соответствующее максимальной силе (Fm); tensile strength (Rm): Stress corresponding to the maximum force (Fm).
удельную прочность на растяжение свыше 23,5 х 104 м; A specific tensile strength exceeding 23.5 x 104 m; Technical Note
«удельная прочность на растяжение» 23,5 х 104 м или более. A'specific tensile strength'of 23.5 x 104 m or greater;
«удельная прочность на растяжение» 7,62 х 104 м или более; A'specific tensile strength'of 7.62 x 104 m or greater;
Rm = минимальная прочность на растяжение, в Н/мм2, гарантированная стандартом на материал; Rm = minimum tensile strength in N/mm2 guaranteed by the material standard
Прочность на растяжение- не менее 10 МПа и относительное удлинение на разрыв- не менее 250 %. Tensile strength not less than 10 MPa and elongation at break not less than 250 per cent.
Прочность на растяжение должна составлять не менее 20 МПа, а относительное удлинение в момент разрыва- не менее 200 %. Tensile strength not less than 20 MPa and elongation at break not less than 200 per cent.
Прочность на растяжение должна составлять не менее 20 МПа, а относительное удлинение в момент разрыва- не менее 250 %. Tensile strength not less than 20 MPa and elongation at break not less than 250 per cent.
Прочность на растяжение должна составлять не менее 10 МПа, а относительное удлинение в момент разрыва- не менее 250 %. Tensile strength not less than 10 MPa and elongation at break not less than 250 per cent.
прочность на растяжение, относительное удлинение при разрыве и модули упругости в соответствии с стандартом EN 61: 1977 в направлении действия напряжений. Tensile strength, elongation at fracture and modulus of elasticity according to EN 61: 1977 in the direction of stresses.
максимальное изменение прочности на растяжение: 25 % maximum change in tensile strength 25 per cent
максимальное изменение прочности на растяжение: 10 % maximum change in tensile strength 10 per cent
максимальное изменение прочности на растяжение: 35 % maximum change in tensile strength 35 per cent
предел прочности на растяжение более 1270 МПа; An ultimate tensile strength exceeding 1,270 MPa; and
Алюминиевые сплавы с пределом прочности на растяжение: Aluminium alloys with a tensile strength of:
Допустимое изменение прочности на растяжение не должно превышать + 25 %. The allowable change in tensile strength should not exceed + 25 per cent.
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.

Dans cette section, vous pouvez voir comment les mots et les expressions sont utilisés dans différents contextes à l'aide d'exemples de traductions faites par des professionnels. La section Contextes vous aidera à apprendre l'anglais, l'allemand, l'espagnol et d'autres langues. Vous trouverez ici des exemples de verbes à particule et d'expressions idiomatiques dans des textes dont le style et le thème varient. Les exemples peuvent être triés par traductions et domaines thématiques.

Apprenez des langues étrangères, découvrez les traductions de millions de mots et d'expressions avec des exemples réels de leur utilisation grâce à notre technologie de recherche bilingue !