Ejemplos del uso de "относительное удлинение" en ruso con traducción "elongation"
Traducciones:
todos16
elongation16
относительное удлинение в момент разрыва- не менее 50 %.
elongation at break not less than 50 per cent.
относительное удлинение в момент разрыва- не менее 100 %.
elongation at break not less than 100 per cent.
где: A0 = минимальное относительное удлинение (в %) используемой стандартной стали при разрушении под разрывным усилием;
where: Ao = minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress;
Прочность на растяжение- не менее 10 МПа и относительное удлинение на разрыв- не менее 250 %.
Tensile strength not less than 10 MPa and elongation at break not less than 250 per cent.
Прочность на растяжение должна составлять не менее 20 МПа, а относительное удлинение в момент разрыва- не менее 200 %.
Tensile strength not less than 20 MPa and elongation at break not less than 200 per cent.
Прочность на растяжение должна составлять не менее 20 МПа, а относительное удлинение в момент разрыва- не менее 250 %.
Tensile strength not less than 20 MPa and elongation at break not less than 250 per cent.
Прочность на растяжение должна составлять не менее 10 МПа, а относительное удлинение в момент разрыва- не менее 250 %.
Tensile strength not less than 10 MPa and elongation at break not less than 250 per cent.
прочность на растяжение, относительное удлинение при разрыве и модули упругости в соответствии с стандартом EN 61: 1977 в направлении действия напряжений.
Tensile strength, elongation at fracture and modulus of elasticity according to EN 61: 1977 in the direction of stresses.
максимальное изменение относительного удлинения в момент разрыва: 30 %.
maximum change in elongation at break 30 per cent
максимальное изменение относительного удлинения в момент разрыва: 35 %.
maximum change in elongation at break 35 per cent
максимальное изменение относительного удлинения в момент разрыва: 10 %.
maximum change in elongation at break 10 per cent.
Коэффициент относительного удлинения должен составлять не менее 14 %.
The elongation for steel shall be at least 14 per cent;
Коэффициент относительного удлинения алюминия должен составлять не менее 12 %.
The elongation for aluminium shall be at least 12 per cent.
максимальное изменение относительного удлинения в момент разрыва:-30 % и + 10 %.
maximum change in elongation at break-30 per cent and + 10 per cent
Для используемых смол определяются величина относительного удлинения при разрыве в соответствии со стандартом EN 61: 1977 и температура тепловой деформации в соответствии со стандартом ISO 75-1: 1993.
The elongation at fracture according to EN 61: 1977 and the heat distortion temperature according to ISO 75-1: 1993 shall be determined for the resins to be used.
Для используемых смол определяются величина относительного удлинения при разрыве в соответствии со стандартом EN ISO 527-5: 1997 и температура тепловой деформации в соответствии со стандартом ISO 75-1: 1993.
The elongation at fracture according to EN ISO 527-5: 1997 and the heat distortion temperature according to ISO 75-1: 1993 shall be determined for the resins to be used.
Los ejemplos del uso de palabras en diferentes contextos se proporcionan únicamente con fines lingüísticos, es decir, para estudiar el uso de palabras en un idioma y sus opciones de traducción a otro. Están recopilados automáticamente de fuentes abiertas utilizando tecnología de búsqueda basada en datos bilingües. Si encuentras un error ortográfico o de puntuación en el original o en la traducción, utiliza la opción "Informar de un problema" o escríbenos.
En esta sección, puedes ver cómo se usan las palabras y expresiones en diferentes contextos con los ejemplos de traducciones realizadas por profesionales. La sección Contextos te ayudara a aprender inglés, alemán, español y otros idiomas. Aquí puedes encontrar ejemplos con las frases verbales, expresiones idiomáticas y palabras ambiguas en textos de diferentes estilos y temas.
Los ejemplos se pueden ordenar por traducciones y temas, y también se puede realizar una búsqueda más precisa en los ejemplos encontrados.
Publicidad