Exemplos de uso de "Исходное" em russo com tradução "initial"
Traduções:
todos1828
source776
original775
initial160
originating23
departure13
onset1
outras traduções80
Это заставляет магний разорвать сплав и вернуться к верхнему электроду, вернув батарею в исходное состояние.
And this forces magnesium to de-alloy and return to the upper electrode, restoring the initial constitution of the battery.
Все изменения, вносимые в прогнозируемую должность, не влияют на задание или должность, на основании которых выполнено исходное создание.
Any changes that you make to the forecast position do not affect the job or position that the initial creation was based on.
Когда оказалось, что исходное положение Германии было более неблагоприятным, чем первоначально предполагалось, и что доходы вновь падают, правительство Германии выступило против дополнительной консолидации.
When it turned out that Germany’s starting position had been more unfavorable than initially thought and that revenues were again failing, Germany’s government objected to additional consolidation.
Хотя, это только исходное представление которое мы все получаем от внешнего вида. И мы пытаемся понять, но на самом деле это очень поверхностно.
However, that's just, you know, the initial idea I may have that we all get when we actually look, and we try to interpret, but actually it's so unbelievably shallow.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной 37 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 37 Nm moment about the R-point.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной 373 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 373 Nm moment about the R-point.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной в 37 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 37 Nm moment about the R-point.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной в 373 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 373 Nm moment about the R-point.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм и с шероховатостью поверхности, определяемой методом средних квадратов, не более 1,6 мкм, начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной в 36,5 ± 0,5 Нм вокруг [точки R] [точки Н].
Using a 165 ± 2 mm diameter spherical head form with a surface roughness of less than 1.6 μm, root mean square, establish the head form initial reference position by applying, perpendicular to the displaced torso reference line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 36.5 ± 0.5 Nm moment about the [H-point] [R-point].
Определить с помощью сферической модели головы диаметром 165 ± 2 мм и с шероховатостью поверхности, определяемой методом средних квадратов, не более 1,6 мкн, начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной в 36,5 ± 0,5 Нм вокруг [точки R] [точки Н].
Using a 165 ± 2 mm diameter spherical head form with a surface roughness of less than 1.6 μm, root mean square, establish the head form initial reference position by applying, perpendicular to the displaced torso reference line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 36.5 ± 0.5 Nm moment about the [H-point] [R-point].
*При экономической реструктуризации важны исходные условия.
• Initial conditions matter in economic restructuring
Неважно, какая система является исходным получателем.
It is not important which system is the initial receiver.
В противном случае будет использоваться исходный домен организации.
If you don’t, it will not align and instead will use your organization's initial domain.
Настройка параметров и исходных параметров (центр обработки вызовов)
Configuring parameters and initial settings (Call center)
Os exemplos de uso de palavras em diferentes contextos são dados só para fins linguísticos, ou seja, para estudar o uso de palavras numa língua e as suas traduções para outra. Todos os exemplos são colecionados automaticamente em fontes abertas usando tecnologia de pesquisa de dados bilíngues. Se você encontrar algum erro de ortografia, pontuação ou outro erro no texto original ou na tradução, use a opção "Reportar um erro" ou escreva para nós.
Nesta seção, você pode ver como palavras e expressões são usadas em diferentes contextos usando exemplos de traduções feitas por profissionais. A seção Contextos o ajudará a aprender inglês, alemão, espanhol e outros idiomas. Aqui você pode encontrar exemplos com verbos frasais e idiomas em textos que variam em estilo e tema. Exemplos podem ser classificados por traduções e tópicos.
Aprenda línguas estrangeiras, veja a tradução de milhões de palavras e expressões e use-as em sua comunicação por e-mail.
Anuncie