Beispiele für die Verwendung von "Наружная поверхность" im Russischen
Наружная поверхность трех новых образцов (рассеиватели) подвергается единообразному испытанию на стойкость к механическому износу с помощью способа, описанного в добавлении 3 к настоящему приложению.
The outer face of the three new samples (lenses) shall be subjected to the uniform mechanical deterioration test by the method described in Appendix 3 to this annex.
Наружная поверхность трех новых образцов (рассеивателей) подвергается единообразному испытанию на стойкость к механическому износу с помощью способа, описанного в добавлении 3 к настоящему приложению.
The outer face of the three new samples (lenses) shall be subjected to the uniform mechanical deterioration test by the method described in Appendix 3 to this annex.
Наружная поверхность трех новых образцов (рассеивателей) подвергается единообразному испытанию на стойкость к механическому износу на основе способа, описанного в добавлении 3 к настоящему приложению.
The outer face of the three new samples (lenses) shall be subjected to the uniform mechanical deterioration test by the method described in appendix 3 to this annex.
Наружная поверхность трех новых образцов (рассеивателей) подвергается единообразному испытанию на стойкость к механическому износу при помощи способа, описанного в добавлении 3 к настоящему приложению.
The outer face of the three new samples (lenses) shall be subjected to the uniform mechanical deterioration test by the method described in Appendix 3 to this annex.
Наружная поверхность трех новых образцов (рассеивателей) подвергается единообразному испытанию на стойкость к механическому износу на основе метода, описанного в добавлении 3 к настоящему приложению.
The outer face of the three new samples (lenses) shall be subjected to the uniform mechanical deterioration test by the method described in Appendix 3 to this annex.
Наружная поверхность блока, к которой крепится деформируемое препятствие, должна быть плоской и сплошной по высоте и ширине и должна быть установлена вертикально ± 1°и перпендикулярно ± 1°к оси подъездного пути транспортного средства.
The front face of the surface to which the deformable barrier is attached shall be flat and continuous over the height and width of the face and shall be vertical ± 1°and perpendicular ± 1°to the axis of the run-up track.
Затем наружная поверхность этих трех образцов слегка протирается в течение одной минуты хлопчатобумажной тканью, пропитанной смесью, в состав которой входит 70 % н-гептана и 30 % толуола (объем в %), и высушивается на открытом воздухе.
The outer face of these three samples shall then be lightly rubbed for one minute with a cotton cloth soaked in a mixture composed of 70 per cent n-heptane and 30 per cent toluene (volume per cent), and shall then be dried in the open air.
После этого наружная поверхность этих трех образцов слегка протирается в течение одной минуты хлопчатобумажной тканью, пропитанной смесью, в состав которой входит 70 % н-гептана и 30 % толуола (объем в %), а затем высушивается на открытом воздухе.
The outer face of these three samples shall then be lightly rubbed for one minute with a cotton cloth soaked in a mixture composed of 70 per cent n-heptane and 30 per cent toluene (volume per cent), and shall then be dried in the open air.
После этого наружная поверхность этих трех образцов слегка протирается в течение одной минуты хлопчатобумажной тканью, пропитанной смесью, в состав которой входит 70 % н-гептана и 30 % толуола (объем в процентах), и затем высушивается на открытом воздухе.
The outer face of these three samples shall then be lightly rubbed for one minute with a cotton cloth soaked in a mixture composed of 70 per cent n-heptane and 30 per cent toluene (volume per cent), and shall then be dried in the open air.
После этого наружная поверхность этих трех образцов слегка протирается в течение одной минуты хлопчатобумажной тканью, пропитанной смесью, в состав которой входит 70 % Н-гептана и 30 % толуола (объем в процентах), а затем высушивается на открытом воздухе.
The outer face of these three samples shall then be lightly rubbed for one minute with a cotton cloth soaked in a mixture composed of 70 per cent n-heptane and 30 per cent toluene (volume per cent), and shall then be dried in the open air.
После этого наружная поверхность этих трех образцов еще раз слегка протирается в течение одной минуты хлопчатобумажной тканью, пропитанной смесью, в состав которой входит 70 % н-гептана и 30 % толуола (по объему), а затем высушивается на открытом воздухе.
The outer face of these three samples shall then be lightly rubbed for one minute with a cotton cloth soaked in a mixture composed of 70 per cent n-heptane and 30 per cent toluene (volume per cent), and shall then be dried in the open air.
После испытания, проведенного в соответствии с пунктом 2.2.1, и измерения, произведенного в соответствии с пунктом 2.2.3.1, наружная поверхность вышеуказанных трех образцов в соответствии с пунктом 2.2.2.2 подвергается обработке смесью, состав которой определен в пункте 2.2.2.1.
After the test described in paragraph 2.2.1. and the measurement described in paragraph 2.2.3.1. have been carried out, the outer face of the said three samples shall be treated as described in paragraph 2.2.2.2. with the mixture defined in paragraph 2.2.2.1.
Наружная поверхность трех образцов (рассеивателей или образцов материала) нагревается до 50°± 5°С и затем на пять минут погружается в смесь, температура которой поддерживается на уровне 23°± 5°С и которая состоит из 99 частей дистиллированной воды, содержащей не более 0,02 % примесей, и одной части алкиларилсульфоната.
The outer face of three samples (lenses or samples of material) shall be heated to 50°C ± 5°C and then immersed for five minutes in a mixture maintained at 23°C ± 5°C and composed of 99 parts distilled water containing not more than 0.02 per cent impurities and one part alkylaryl sulphonate.
Наружная поверхность трех образцов (рассеиватели или образцы материала) нагревается до 50°С ± 5°С и затем на пять минут погружается в смесь, температура которой поддерживается на уровне 23°С ± 5°С и которая состоит из 99 частей дистиллированной воды, содержащей не более 0,02 % примесей, и одной части алкиларилсульфоната.
The outer face of three samples (lenses or samples of material) shall be heated to 50°C ± 5°C and then immersed for five minutes in a mixture maintained at 23°C ± 5°C and composed of 99 parts distilled water containing not more than 0.02 per cent impurities and one part alkylaryl sulphonate.
Наружная поверхность трех образцов (рассеивателей или образцов материала) нагревается до 50°C ± 5°C и затем на пять минут погружается в смесь, температура которой поддерживается на уровне 23°C ± 5°C и которая состоит из 99 частей дистиллированной воды, содержащей не более 0,02 % примесей, и одной части алкиларилсульфоната.
The outer face of three samples (lenses or samples of material) shall be heated to 50°C + 5°C and then immersed for five minutes in a mixture maintained at 23°C + 5°C and composed of 99 parts distilled water containing not more than 0.02 per cent impurities and one part alkylaryl sulphonate.
После испытания, проведенного в соответствии с пунктом 2.2.1 выше, и измерения, произведенного в соответствии с пунктом 2.2.3.1 ниже, наружная поверхность вышеуказанных трех образцов в соответствии с пунктом 2.2.2.2 подвергается обработке смесью, состав которой определен в пункте 2.2.2.1 ниже.
After the test described in paragraph 2.2.1. above and the measurement described in paragraph 2.2.3.1. below have been carried out, the outer face of the said three samples shall be treated as described in paragraph 2.2.2.2. with the mixture defined in paragraph 2.2.2.1. below.
Наружная поверхность трех образцов (рассеивателей или образцов материала) нагревается до 50°С ± 5°С и затем на пять минут погружается в смесь, температура которой поддерживается на уровне 23°С ± 5°С и которая состоит из 99 частей дистиллированной воды, содержащей не более 0,02 % примесей, и одной части алкиларилсульфоната.
The outer face of three samples (lenses or samples of material) shall be heated to 50°C ± 5°C and then immersed for five minutes in a mixture maintained at 23°C ± 5°C and composed of 99 parts distilled water containing not more than 0.02 per cent impurities and one part alkylaryl sulphonate.
После испытания, проведенного в соответствии с вышеизложенным пунктом 2.2.1, и измерения, произведенного в соответствии с нижеизложенным пунктом 2.2.3.1, наружная поверхность вышеуказанных трех образцов в соответствии с пунктом 2.2.2.2 подвергается обработке смесью, состав которой определен в пункте 2.2.2.1 ниже.
After the test described in paragraph 2.2.1. above and the measurement described in paragraph 2.2.3.1. below have been carried out, the outer face of the said three samples shall be treated as described in paragraph 2.2.2.2. with the mixture defined in paragraph 2.2.2.1. below.
После испытания, проведенного в соответствии с пунктом 2.2.1 выше, и измерения, произведенного в соответствии с пунктом 2.2.3.1 ниже, наружная поверхность трех вышеуказанных образцов в соответствии с пунктом 2.2.2.2 подвергается обработке смесью, состав которой определен в пункте 2.2.2.1 ниже.
After the test described in paragraph 2.2.1. above and the measurement described in paragraph 2.2.3.1. below have been carried out, the outer face of the said three samples shall be treated as described in paragraph 2.2.2.2. with the mixture defined in paragraph 2.2.2.1. below.
После испытания, проведенного в соответствии с вышеупомянутым пунктом 2.2.1, и измерения, произведенного в соответствии с нижеупомянутым пунктом 2.2.3.1, наружная поверхность вышеуказанных трех образцов в соответствии с пунктом 2.2.2.2 подвергается обработке смесью, состав которой определен ниже в пункте 2.2.2.1.
After the test described in paragraph 2.2.1. above and the measurement described in paragraph 2.2.3.1. below have been carried out, the outer face of the said three samples shall be treated as described in paragraph 2.2.2.2. with the mixture defined in paragraph 2.2.2.1 below.
Beispiele für den Wortgebrauch in verschiedenen Kontexten werden ausschließlich zu linguistischen Zwecken bereitgestellt, d. h. um den Wortgebrauch in einer Sprache und Varianten ihrer Übersetzung in eine andere zu untersuchen. Alle Beispiele werden automatisch aus offenen Quellen mit Hilfe einer zweisprachigen Suchtechnologie gesammelt. Wenn Sie einen Rechtschreib-, Zeichensetzungs- oder anderen Fehler im Original oder in der Übersetzung finden, nutzen Sie die Option „Problem melden“ oder schreiben Sie uns.
In diesem Abschnitt können Sie anhand professioneller Übersetzungen sehen, wie einzelne Wörter und Ausdrücke in verschiedenen Kontexten verwendet werden. Kontexte helfen Ihnen, Englisch, Deutsch, Französisch, Spanisch und andere Sprachen zu lernen. Hier finden Sie Beispiele mit Phrasal verbs im Englischen, idiomatischen Ausdrücken und mehrdeutigen Wörtern in einer Vielzahl von Stilen und Themen. Die Beispiele können nach Übersetzung und Themen sortiert werden, und anhand der gefundenen Beispiele kann eine Verfeinerungssuche durchgeführt werden.
Lernen Sie Fremdsprachen und prüfen Sie Verwendung von Wörtern an realen zweisprachigen Beispielen.
Werbung