Traduction de "steel joint bar" en russe
Résultat de la traduction
Votre texte a été partiellement traduit.
Vous ne pouvez pas traduire plus de 999 caractères à la fois.
Connectez-vous ou inscrivez-vous gratuitement sur PROMT.One et traduisez encore plus !
La publicité
Traductions du dictionnaire pour "steel joint bar"
Contextes avec "steel joint bar"
In order to calibrate the manikin to certain values and its total mass, the mass distribution are adjusted by the use of six correction steel masses of 1 kg each, which can be mounted at the hip joint.
Для того чтобы калибровать манекен в соответствии с определенными величинами, его общая масса и распределение этой массы регулируются с помощью шести регулировочных стальных грузов массой 1 кг каждый, которые можно устанавливать на тазобедренное сочленение.
The Joint Meeting had in 2004 adopted a proposal from UIC/IUR to increase the design and test pressures for certain substances of Class 3, packing group I, from 1,5 to 4 bar.
В 2004 году Совместное совещание приняло переданное МСЖД предложение увеличить с 1,5 до 4 бар расчетное и испытательное давления цистерн для некоторых веществ класса 3, группа упаковки I.
Percussion test: The specimen shall be placed on a sheet of lead which is supported by a smooth solid surface and struck by the flat face of a mild steel bar so as to cause an impact equivalent to that resulting from a free drop of 1.4 kg through 1 m.
испытание на удар: образец помещается на свинцовую пластину, лежащую на гладкой твердой поверхности, и по нему производится удар плоской стороной болванки из мягкой стали с силой, равной удару груза массой 1,4 кг при свободном падении с высоты 1 м.
They shall be made of steel and shall be subjected to an initial test and periodic tests every 10 years at a pressure of not less than 1 MPa (10 bar, gauge pressure).
Они должны изготавливаться из стали и подвергаться первоначальному испытанию и каждые десять лет периодическому испытанию при давлении, составляющем не менее 1 МПа (10 бар, манометрическое давление).
At the September 2007 session of the Joint Meeting, the UIP proposal to align the definition of mild steel in RID/ADR section 1.2.1 with the current standard value for S355J2 + N was discussed by the working group on tanks.
На сессии Совместного совещания, проходившей в сентябре 2007 года, предложение МСАГВ о том, чтобы согласовать определение мягкой стали в разделе 1.2.1 МПОГ/ДОПОГ с нынешним нормативным значением для S355J2 + N, обсуждалось Рабочей группой по цистернам.
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.
La publicité