Tradução de "исходное положение" para o inglês
Tradução
Seu texto foi parcialmente traduzido.
Pode traduzir no máximo 999 caracteres por vez.
Faça o login ou registre-se gratuitamente em PROMT.One e traduza ainda mais!
Anuncie
Traduções de dicionário para "исходное положение"
pl.
исходные положения
Expressões com "исходное положение" (4)
- возврат в исходное положение - reset
- возвращение в исходное положение - resetting
- возвращение стрелки в исходное положение - pointer return to initial position
- приведение в исходное положение - resetting
Exemplos com "исходное положение"
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной 37 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 37 Nm moment about the R-point.
Когда оказалось, что исходное положение Германии было более неблагоприятным, чем первоначально предполагалось, и что доходы вновь падают, правительство Германии выступило против дополнительной консолидации.
When it turned out that Germany’s starting position had been more unfavorable than initially thought and that revenues were again failing, Germany’s government objected to additional consolidation.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной 373 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 373 Nm moment about the R-point.
Определить с помощью сферической модели головы диаметром 165 ± 2 мм начальное исходное положение модели головы путем приложения перпендикулярно к смещенной исходной линии туловища первоначальной нагрузки в заднем направлении, проходящей по осевой линии сиденья на высоте 65 ± 3 мм ниже верха подголовника, которая должна создавать крутящий момент величиной в 37 Нм вокруг точки R.
Using a 165 ± 2 mm diameter spherical head form, establish the head form initial reference position by applying, perpendicular to the displaced torso line, a rearward initial load at the seat centreline at a height 65 ± 3 mm below the top of the head restraint that will produce a 37 Nm moment about the R-point.
Os exemplos de uso de palavras em diferentes contextos são dados só para fins linguísticos, ou seja, para estudar o uso de palavras numa língua e as suas traduções para outra. Todos os exemplos são colecionados automaticamente em fontes abertas usando tecnologia de pesquisa de dados bilíngues. Se você encontrar algum erro de ortografia, pontuação ou outro erro no texto original ou na tradução, use a opção "Reportar um erro" ou escreva para nós.
Anuncie