Exemples d'utilisation de "изгибы" en russe avec la traduction "bend"

<>
изгибы, трещины или разрывы в конструкционных или опорных элементах, которые нарушают целостность контейнера; Bends, cracks or breaks in the structural or supporting members that affect the integrity of the container.
Согласно его теории, пространство и время формируют растягивающуюся материю, которая искривляется под воздействием тяжелых объектов. Почувствовать гравитацию значит попасть в изгибы этой материи. According to his theory, space and time form a stretchy fabric that bends under heavy objects, and to feel gravity is to fall along the fabric’s curves.
Поручни не должны иметь крупных изгибов. Handrails shall not have sharp bends.
Причал будет за изгибом реки, примерно через две мили отсюда. The approach is around the bend of the river, about two miles up.
испытание на изгиб по продольному сварному соединению, напряжение на внутренней поверхности bend test on a longitudinal weld, the inner surface in tension
испытание на изгиб по кольцевому сварному соединению, напряжение на внутренней поверхности bend test on a circumferential weld, the inner surface in tension
испытание на изгиб по продольному сварному соединению, напряжение на внешней поверхности bend test on a longitudinal weld, the outer surface in tension
одно испытание на изгиб по продольному сварному соединению, напряжение на внутренней поверхности; One bend test on the longitudinal weld, the inner surface in tension;
одно испытание на изгиб по продольному сварному соединению, напряжение на внешней поверхности; One bend test on the longitudinal weld, the outer surface in tension;
одно испытание на изгиб по кольцевому сварному соединению, напряжение на внутренней поверхности; One bend test on the circumferential weld, the inner surface in tension;
одно испытание на изгиб по кольцевому сварному соединению, напряжение на внешней поверхности; и One bend test on the circumferential weld, the outer surface in tension; and
Испытания на изгиб проводятся на внутренней поверхности, находящейся под напряжением, и на внешней поверхности, находящейся под напряжением ". The bend tests shall be carried out on the inner surface in tension and the outer surface in tension.”
Есть опасения, что информационные технологии сегодня находятся на изгибе "хоккейной клюшки", где могут сделать сильный, неожиданный рывок. The worry is that information technology is now on the bend of a "hockey stick" curve, where it will suddenly take off at much greater speed than before.
Испытание на изгиб проводится с помощью оправки диаметром (d) и двух круглых опор, расположенных на расстоянии (d + 3е). The bend test shall be carried out between a mandrel of diameter (d) and two circular supports separated by a distance of (d + 3e).
Китай уже идентифицировал изгиб, где Брахмапутра сформирует самый длинный и самый глубокий каньон в мире - буквально на границе с Индией - в качестве точки вмешательства. China already has identified the bend where the Brahmaputra forms the world's longest and deepest canyon - just before entering India - as the diversion point.
При использовании устанавливаемого в конце выхлопной трубы дымомера последние 0,6 м трубы должны иметь круглое поперечное сечение, и на этом участке не должно быть никаких коленчатых патрубков и изгибов. With an end-of-line opacimeter, the terminal 0.6 m of the exhaust pipe must be of circular cross paragraph and be free from elbows and bends.
И это всё покрывает наш кожный покров, с чрезвычайно сложной, трёхмерной структурой - с изгибами в разных местах, с тонкой тканью в области век и с более плотной на щеках, и разных цветов. And overlying this is the skin drape, which is a hugely complex three-dimensional structure - taking right-angled bends here and there, having thin areas like the eyelids, thick areas like the cheek, different colors.
Для изокинетической системы выхлопная труба не должна иметь колен, изгибов и резких изменений диаметра на расстоянии, по крайней мере равном шести диаметрам трубы вверх от наконечника пробоотборника и трем диаметрам трубы вниз от него. For an isokinetic system, the exhaust pipe must be free of elbows, bends and sudden diameter changes for at least six pipe diameters upstream and three pipe diameters downstream of the tip of the probe.
определение гибкости в соответствии с ASTM D522: Испытание несъемных органических покрытий на изгиб с помощью оправки, методом испытания B с помощью оправки диаметром 12,7 мм (0,5 дюйма) при установленной толщине и температуре-20°C. flexibility in accordance with ASTM D522 Mandrel Bend Test of Attached Organic Coatings, using Test Method B with a 12.7 mm (0.5 in) mandrel at the specified thickness at-20°C.
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.

Dans cette section, vous pouvez voir comment les mots et les expressions sont utilisés dans différents contextes à l'aide d'exemples de traductions faites par des professionnels. La section Contextes vous aidera à apprendre l'anglais, l'allemand, l'espagnol et d'autres langues. Vous trouverez ici des exemples de verbes à particule et d'expressions idiomatiques dans des textes dont le style et le thème varient. Les exemples peuvent être triés par traductions et domaines thématiques.

Apprenez des langues étrangères, découvrez les traductions de millions de mots et d'expressions avec des exemples réels de leur utilisation grâce à notre technologie de recherche bilingue !