Sentence examples of "удлинению" in Russian with translation "elongation"
Плоский лоб, удлинение теменной и затылочной областей.
Flat forehead, elongation of the parietal and occipital regions.
A = коэффициент удлинения (в процентах) основного материала;
A = elongation value (per cent) of parent material;
относительное удлинение в момент разрыва- не менее 50 %.
elongation at break not less than 50 per cent.
относительное удлинение в момент разрыва- не менее 100 %.
elongation at break not less than 100 per cent.
максимальное изменение относительного удлинения в момент разрыва: 30 %.
maximum change in elongation at break 30 per cent
максимальное изменение относительного удлинения в момент разрыва: 35 %.
maximum change in elongation at break 35 per cent
максимальное изменение относительного удлинения в момент разрыва: 10 %.
maximum change in elongation at break 10 per cent.
Коэффициент относительного удлинения должен составлять не менее 14 %.
The elongation for steel shall be at least 14 per cent;
A0 = 27 (минимальное удлинение при разрыве для эталонной стали);
Ao = 27 (minimum elongation for reference steel);
Коэффициент относительного удлинения алюминия должен составлять не менее 12 %.
The elongation for aluminium shall be at least 12 per cent.
максимальное изменение относительного удлинения в момент разрыва:-30 % и + 10 %.
maximum change in elongation at break-30 per cent and + 10 per cent
Для сплавов алюминия удлинение при разрыве должно быть не менее 12 %.
For aluminium alloys the elongation at fracture shall be not less than 12 %.
Допустимое изменение удлинения в момент разрыва не должно превышать следующих значений:
The allowable change in ultimate elongation shall not exceed the following values:
где: A0 = минимальное относительное удлинение (в %) используемой стандартной стали при разрушении под разрывным усилием;
where: Ao = minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress;
Прочность на растяжение- не менее 10 МПа и относительное удлинение на разрыв- не менее 250 %.
Tensile strength not less than 10 MPa and elongation at break not less than 250 per cent.
Прочность на разрыв при растяжении и критическое удлинение определяются в соответствии с пунктом A.22 (добавление A).
The tensile yield strength and ultimate elongation shall be determined in accordance with paragraph A.22 (Appendix A).
Прочность на растяжение должна составлять не менее 20 МПа, а относительное удлинение в момент разрыва- не менее 200 %.
Tensile strength not less than 20 MPa and elongation at break not less than 200 per cent.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.
In this section, you can see how words and expressions are used in different contexts using examples of translations made by professionals. The Contexts section will help you learn English, German, Spanish and other languages. Here you can find examples with phrasal verbs and idioms in texts that vary in style and theme. Examples can be sorted by translations and topics.
Learn foreign languages, see the translation of millions of words and expressions, and use them in your e-mail communication.
Advert